Deep Wheel Cleaner
Dilutes up to 9-1
Emulsifies Wheel Dirt
An alkaline based wheel cleaner which quickly breaks down dirt and accumulated brake dust on alloy and factory finished lacquered wheels. Provides excellent detergent and emulsification for soils contained in wheel grime.
Dilute 1 part product up to 3 parts water for heavy soiling. Dilute 1 part product up to 5 parts water for medium soiling. Dilute 1 part product up to 9 parts water for light soiling.
DIRECTIONS FOR USE
Spray or brush this product on to the wheels, and allow to soak for approximately 1-2 minutes. Agitate if necessary. Rinse thoroughly with clean water, ideally with a pressure washer. It may be necessary to repeat the application for more stubborn stains.
COOL WHEELS BEFORE USE.
CAUTION: Do not apply this product to wheels in direct sunlight. Do not allow this product to dry out on the wheels as damage may occur. Please note this is a professional strength product and is only suitable for factory finished alloy wheels at the above dilution ratios. Do not use on chrome plated, powder coated, magnesium alloy and anodised wheels. Avoid contact with surrounding plastic and paintwork as this may stain. Remove any splashes immediately with a neutral detergent and rinse with water. It is the user’s responsibility to determine suitability by testing compatibility on a small area prior to use, especially on poor quality alloy wheels. If in doubt, please contact us for further advice.
100ml, 500ml, 5L